MacResource
help design this simple A/V setup - Printable Version

+- MacResource (https://forums.macresource.com)
+-- Forum: My Category (https://forums.macresource.com/forumdisplay.php?fid=1)
+--- Forum: Tips and Deals (https://forums.macresource.com/forumdisplay.php?fid=3)
+--- Thread: help design this simple A/V setup (/showthread.php?tid=245966)

Pages: 1 2


help design this simple A/V setup - deckeda - 09-05-2020

A friend asked me and I'm struggling to tell him his options, based on usage.

1. Main room (new basement construction, drywalls not yet installed) will have home theater of some kind.

2. Secondary, adjacent room is a workout/gym room also with a TV.

The TVs would need to be fed independently, which also implies whatever sound those rooms hear. I mention the sound in the workout/gym because he's also interested in something better that TV speakers there ... with possible syncing so that both rooms play the same music (with TVs turned off I suppose, but if they could be fed by the same video that opens up possibilities.)

- I'm aware that surround sound receivers often have a 2nd zone for audio (pre-amp outputs?) or maybe that's handled at the speaker-level instead, kinda like the old days with a traditional A/B speaker switch built in.

- but that doesn't address how to switch from the gym's TV sound to the main stereo's sound (and volume settings, too)

You can see that I'm wondering if these should be two completely separate audio/video system, with potentially the gym room getting an aux feed of some kind from the other room.


Re: help design this simple A/V setup - deckeda - 09-05-2020

You're tempted to ask about budgets and A/V sources and I don't know them at this time. I just want to know what's possible.


Re: help design this simple A/V setup - Fritz - 09-05-2020

if it were me, and I was looking to do the same, I'd use 2 systems.

but for us here, I have one Emby server that hits the 2 TVs and one remote location.

the main has the receiver, better newer TV, mid range pro small speakers (4" woof, 2 way)
the 2nd TV (bedroom) just uses "computer speakers w/"sub".


Re: help design this simple A/V setup - N-OS X-tasy! - 09-05-2020

Take a look at matrix switches from the likes of Crestron or Extron. Hopefully they offer something for non-professional use that isn’t too expensive.


Re: help design this simple A/V setup - Carm - 09-05-2020

Two systems. second that idea
My SIL has one system for indoor and outdoor speakers. It’s an all same sound or none. They can chose to turn on outside or not, but I wouldn’t do it like that. Get a cheap receiver for workout room


Re: help design this simple A/V setup - deckeda - 09-05-2020

Fritz wrote:

...the 2nd TV (bedroom) just uses "computer speakers w/"sub".

OK so depending on source(s) the TV needs RCA output or the source does, if say it’s just a cable box.


Re: help design this simple A/V setup - Will Collier - 09-05-2020

This really depends on what feeds the TVs: cable box, streaming boxes, something else? Without knowing that it's hard to know where to start.

The multi-zone receiver is definitely an option for audio. Buddy of mine has a lake house with that kind of a setup and it works pretty well.


Re: help design this simple A/V setup - Fritz - 09-05-2020

deckeda wrote:
[OK so depending on source(s) the TV needs RCA output or the source does, if say it’s just a cable box.

I run audio only thru the TV upstairs. I'm lazy. I've sought other solutions but because the speakers are older and have no dig input, there are too many hoops to make that happen.
Downstairs, same, coz the rcvr is pre wifi/BT enabled.


Re: help design this simple A/V setup - Ombligo - 09-05-2020

If he just wants to feed music, I'd leave the TV's out of the mix completely and just use a couple smart speakers running off an echo or similar. There are numerous Bluetooth speakers of all sizes out there. Alternatively, he could put a Bluetooth receiver on his amp and feed the speakers from his phone, etc.


Re: help design this simple A/V setup - John B. - 09-05-2020

Depends on what the music audio source is going to be. Sonos and Roku and others make soundbars that could either be the local TV audio or play music from another source.