![]() |
What apps do you use to test for bad RAM in Tiger? - Printable Version +- MacResource (https://forums.macresource.com) +-- Forum: My Category (https://forums.macresource.com/forumdisplay.php?fid=1) +--- Forum: Tips and Deals (https://forums.macresource.com/forumdisplay.php?fid=3) +--- Thread: What apps do you use to test for bad RAM in Tiger? (/showthread.php?tid=37178) |
What apps do you use to test for bad RAM in Tiger? - Jimmypoo - 07-26-2007 Something that will identify it by socket without removing them one at a time, if possible. Thanks! j Re: What apps do you use to test for bad RAM in Tiger? - Silencio - 07-26-2007 I prefer MemTest, preferably run from Single User Mode via the current version of AppleJack. Unfortunately, I haven't seen any memory testers that can isolate a bad patch of memory to a particular RAM socket. Gotta do the old process of elimination thing... Re: What apps do you use to test for bad RAM in Tiger? - Fritz - 07-26-2007 how does one run it from AJ? I don't see it in the AJ menu under Single User mode. Re: What apps do you use to test for bad RAM in Tiger? - BigGuynRusty - 07-26-2007 Rember, a GUI wrapper for MemTest. http://www.macupdate.com/info.php/id/15837 BGnR Re: What apps do you use to test for bad RAM in Tiger? - Silencio - 07-26-2007 If you're running AppleJack 1.4.3, press "x" instead of 1-5 at the main menu. That will give you the super secret menu with memory testing and a few other things. You do have to use the "Customize" option in the AppleJack 1.4.3 installer to actually install Memtest in the first place; I haven't tried running it with a copy of Memtest installed separately - I think the standalone version is newer than the one bundled with AppleJack. And I prefer running Memtest in single user mode because it can grab more RAM for itself to test than it can while running in full graphical mode through Rember. Re: What apps do you use to test for bad RAM in Tiger? - Fritz - 07-26-2007 thanks for both concepts Re: What apps do you use to test for bad RAM in Tiger? - Jimmypoo - 07-28-2007 ran REMBER again for 24 hours, this time no errors. Just wondering before I pull stuff apart and do a general clean-out and disk replacement, etc. I need a multi-slot dedicated RAM tester machine! That would do it! |