08-19-2011, 04:15 PM
I would use sanding tape or cord for those cracks and crevices. Places like Rockler and Woodcraft carry that. Or, cut some cloth-backed paper into thin strips.
I'd probably use sanding sponges on the relatively flat areas. I'd start at 100 grit, then work up to 220, vacuuming between grits. It's hard to say not knowing exactly what type of wood it is, or what finish you'll be applying.
I'd probably use sanding sponges on the relatively flat areas. I'd start at 100 grit, then work up to 220, vacuuming between grits. It's hard to say not knowing exactly what type of wood it is, or what finish you'll be applying.