Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
use for an aluminum g5?
#21
clay wrote:
[quote=Mr645]I've got 5 HDs in mine, courtesy of a Jive bracket. One of these days when I have lots of extra time, I have to remove some of those drives and put them to different use.

Mr645 wrote:
The stock G5 holds 2 drives and the G5 Jive bracket adds space for three more, 5 total. I tried putting a drive above the optical drive but it runs too hot up there. But with the bracket you can fit 5 4TB drives inside a G5 tower and the power supply and overall construction makes for a well built, very reliable server

I'm not gonna argue that there weren't sweet tools for adding a bunch of drives internally to G5's, but if you're starting from scratch, it probably isn't worth the time/cost to find those brackets, cables, and other stuff to make it all work. Don't forget about a PCI-x card to drive the SATA drives, etc. Even putting $50 into a machine like this is not worth it in my opinion.
Agreed. I may have replaced those G5 servers with something else if it were not for the PCI-X cards that wont fit anything else
Reply


Messages In This Thread
use for an aluminum g5? - by davemchine - 07-21-2013, 07:25 AM
Re: use for an aluminum g5? - by GGD - 07-21-2013, 07:31 AM
Re: use for an aluminum g5? - by haikuman - 07-21-2013, 09:55 AM
Re: use for an aluminum g5? - by Mr645 - 07-21-2013, 11:18 AM
Re: use for an aluminum g5? - by clay - 07-21-2013, 01:01 PM
Re: use for an aluminum g5? - by haikuman - 07-21-2013, 02:52 PM
Re: use for an aluminum g5? - by Forrest - 07-21-2013, 04:05 PM
Re: use for an aluminum g5? - by john-o - 07-21-2013, 04:07 PM
Re: use for an aluminum g5? - by davemchine - 07-21-2013, 07:14 PM
Re: use for an aluminum g5? - by Dennis S - 07-21-2013, 07:25 PM
Re: use for an aluminum g5? - by rz - 07-21-2013, 08:13 PM
Re: use for an aluminum g5? - by Chakravartin - 07-21-2013, 08:29 PM
Re: use for an aluminum g5? - by clay - 07-21-2013, 08:41 PM
Re: use for an aluminum g5? - by ka jowct - 07-21-2013, 09:51 PM
Re: use for an aluminum g5? - by Mr645 - 07-22-2013, 12:50 AM
Re: use for an aluminum g5? - by clay - 07-22-2013, 02:03 AM
Re: use for an aluminum g5? - by Speedy - 07-22-2013, 03:31 AM
Re: use for an aluminum g5? - by davemchine - 07-22-2013, 04:26 AM
Re: use for an aluminum g5? - by Racer X - 07-22-2013, 04:47 AM
Re: use for an aluminum g5? - by Mr645 - 07-27-2013, 02:48 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)