12-13-2020, 02:16 AM
How do you connect the valve to the pipe coming from the wall? there should be a compression nut on the pipe, you can re-use the old one, or remove it (usually you need a tool to extract it) and use the one that comes with the new valve.
Then use a large wrench to hold the valve in the vertical position (outlet at 12 o'clock) and use a smaller wrench to tighten the nut in the back.
Then use a large wrench to hold the valve in the vertical position (outlet at 12 o'clock) and use a smaller wrench to tighten the nut in the back.