05-13-2008, 04:09 AM
[quote cbelt3]So you're graduating from the controlling wench to controlling a wrench ? Good for you.
deckeda- for the gas door, squirt a little WD-40 into the door, aiming around for the latch area. Smack it a few times to see if it unlatches. In extremis you can get in there with a tool and yank the cover off, but you might not be able to
get it back on.
My guess- Either the cable is not pulling the locking pin far enough or the door is not springing open. You can try pulling the cable a little farther with some pliers.
deckeda- for the gas door, squirt a little WD-40 into the door, aiming around for the latch area. Smack it a few times to see if it unlatches. In extremis you can get in there with a tool and yank the cover off, but you might not be able to
get it back on.
My guess- Either the cable is not pulling the locking pin far enough or the door is not springing open. You can try pulling the cable a little farther with some pliers.