this is a moderated forum

[davemchine]

I just posted to the discussion about a water pump and received a message saying "this is a moderated forum...your message will appear after being reviewed." I see silvarios had the same problem a few weeks ago but I don't see any answers as to why. Let's see if this message gets posted right away or not.

[davemchine]

Ok, that happened immediately. Weird.

[davemchine]

This pump will generate an additional 35-45 pounds of pressure on top of what the inlet pressure is.
The best way to regulate the discharge pressure is to install a Pressure Regulation Valve on the inlet side, before the pump, and reduce the inlet pressure to ~20-25lbs

Thanks
Grundfos Product Support wrote:

[davemchine]

That is the identical text to the message that got held for review.

[hal]

This pump will generate an additional 35-45 pounds of pressure on top of what the inlet pressure is.
The best way to regulate the discharge pressure is to install a Pressure Regulation Valve on the inlet side, before the pump, and reduce the inlet pressure to ~20-25lbs

Thanks
Grundfos Product Support

[hal]

I had no problem posting the previous post

edit: (but why would anyone want to post that here?)

[OWC Jamie]

It's just a distraction the NSA uses to keep you concentrated at the task at hand while they rescan your body for useable parts to extract and sell on the black market.

[Black]

Some algorhythm got triggered to hold the post. The word "pump? Too many posts in a short time?

[Black]

This pump will generate an additional 35-45 pounds of pressure on top of what the inlet pressure is.
The best way to regulate the discharge pressure is to install a Pressure Regulation Valve on the inlet side, before the pump, and reduce the inlet pressure to ~20-25lbs

Thanks
Grundfos Product Support

[Acer]

This pump will pump an additional 35-45 pounds of pump pressure on top of what the inlet pump pressure is.
The best way to pump the discharge pump pressure is to install a pump Pressure Pump Valve on the inlet pump side, before the pump, and reduce the inlet pump pressure to ~20-25lbs.

Pump on!
Grundfos Pump Support