Source for specific computer fans?

[microchip13]

I'm looking to find a place that offers a large array of computer fans, at the must it has to be 40mmx40mmx10mm and ideally there would be two that fed off of a single 3 pin connector.


I know this is a long shot, but I figure it's worth an ask.


TiA.

[Carm]

The only problem you might have is the the three pin connector. Most are two. The three pin connectors are usually for thermally controlled fans. At least that is what I remember.


Carm

[microchip13]

Fan RPM I believe.

For work I'm building several computers which involve a fan set up like that, I don't enjoy having to take the time to hook the two fans together, remove the connector, extend the connection and solder a 3 pin connector onto it.

Just trying to save time.

[Carm]

How about this one: http://www.hardwarecooling.com/product_i...6c36bfe846

or this one http://www.performance-pcs.com/catalog/i...oduct_info&cPath=123&products_id=618&zenid=90c0d569200fba94e4dab2343845b6bc

YES RPM if the fan is so equiped
Carm

[JoeH]

I have had good luck matching fans through the Jameco catalog, either on-line or the paper one. Don't have it handy at the moment though, it got packed when I was laid off last year.

[microchip13]

Hmm. Those aren't too bad, I'll also look around and see what else they've got.

Thanks!

[Racer X]

carm, that first one has really good airflow for a 40x40x10 fan. Most are 5.5-6.0 cfm.

That second one is pretty loud though.

just my 2 cents worth.

I researched the 40x40 fans for G4 zifs and OCing in B&W machines.