08-01-2013, 12:31 AM
The old switch is removed by removing the brass screws.
Make sure that the power is off before removing it. Do not disconnect any wires from the switch. Post pictures showing how the wires connect. I see several black, 1 blue, 1 green and 1 white wire. I need to see how this is wired to see if the new switch will work.
Make sure that the power is off before removing it. Do not disconnect any wires from the switch. Post pictures showing how the wires connect. I see several black, 1 blue, 1 green and 1 white wire. I need to see how this is wired to see if the new switch will work.